Report Foxwell NT510 BMW Pros & Cons – does 80% of factory systems can do

This is a real story, I initially bought Foxwell NT510 scanner for BMW only, hook it up to the BMW car OBD II port and very impressive with its service and maintenance performance.

Pros: As a professional technician, I will say Foxwell NT510 scanner tool can do roughly 80% of what our factory systems are capable of doing. For the price, it’s impressive. All the important service functions are there i.e coding, abs bleeding, battery register, DPF, injector correction and so on.

Cons: Here is what I don’t like, and maybe someone can respond if this has also happened to them. I have the BMW program installed. The only way to read any codes is to do the auto scan, which can take several minutes if you’re working on a late model car with 20 or 30 control units. It will give you the option to instead go into specific control units, but what you select ‘read codes’, a warning pops up that it is about to erase the codes and asks if you want to continue. If you select continue, it erases the codes without even displaying them or telling you what they are. So again, you have to do the complete auto scan and then read all the codes, you can’t read codes for a specific control module only.

This is a Chinese company, and sometimes words and acronyms are ‘lost in translation”.

Overall, it’s not a bad product.

http://www.foxwelltechshop.com/wholesale/nt510-multi-system-scanner-with-one-fre-car-brand-software-and-obd.html

Review Foxwell NT510 scanner GM Toyota Ford

Foxwell NT510 tool I’ve used a bit more and it’s done well. Keep in mind, $155 just buys the tool and enhanced software for one OEM…Each additional OEM (up to 5) has to be purchased separately for $60. I have Toyota, GM, and Ford loaded in mine. Without the enhanced upgrades, it’s just a cheap generic scanner.

Foxwell NT510 tool is VERY capable…when it works. I have had problems with it freezing up, usually while I’m trying to monitor some PIDs while using bi-directional or on a road test…kinda defeats the purposes of being able to observe values on the fly when that happens.

Also, like many lower cost tools…which is likely a hardware limitation, the sample rate is shit. Example:…I was attempting to view several starter enable/command PIDs on a cadillac the other day, and the tool would not sample fast enough to change the PID from “OFF” to “ON” in the time it took the engine start.

I can say though, that this is the best cheap scanner I’ve ever used. The company is good to deal with although they’re Chinese; the customer support is mostly worth. If you have a problem, they’ll refund the cost of the tool, but not the cost of your software, which is shitty.

I’ve used it to do a cam sensor reset on a 99ish 454 suburban, I’ve used it to do the ABS bleed on a handful of GMs and a prius. It performs the zero point calibration for the ABS/trac system on my 2003 4runner, and I was able to control the VVTi solenoids on the engine.

At this point, for the price, I would recommend it.

I have the Foxwell NT510, a Launch CRP129, and the AutoEnginuity with Asian and Domestic enhanced bundle. The AutoEnginuity is more capable and has better graphing and mode $6 data, but I find that between the Launch and the Foxwell and my scope, I’ve been able to solve the limited scope of everything that has come my way.

http://www.foxwelltechshop.com

Experience Use Foxwell NT510 Toyota Lexus Scion

I Paid $155 for Foxwell NT510 multi-system scanner from www.foxwelltechshop.com, create a Foxwell ID through foxwelltech.com official website, register my scanner, update my scanner to the newest version, then download Toyota, Lexus and Scion car brand software (referring to the NT510 user manual).

Hook foxwell NT510 up to the Toyota one by one, all are good, Very impressed with its service and maintenance performance (special functions) i.e coding, abs bleeding, battery register, DPF, injector correction and so on, so it not only do basic OBD diagnostic.

Moreover, Foxwell NT510 is handheld scanner, all my diag tools (i.e Toyota TIS Techstream) are laptop based and it’s a bit of a pain dragging the laptop out and waiting for it to boot up, so having a standalone tool like this for quick & dirty diagnosis & resets would be pretty good.

Test most and all good, so I consider Foxwell engineers are the guys of their words. Here I attach here the supplier’s pdf, which are comprehensive including all the tested functions: ECU info, reade codes, erase codes, live data, freeze fram, active test and special function.

Tips: the guy promised I am allowed to add up to 5 car brands as I like, and they claim the working car brands incl. 1. Chrysler 2. GM 3. Honda, Accura 4. Hyundai, Kia 6. Land Rover, Jaguar 7. OPEL, Vauxhall 8. VW, AUDI, Seat, Skoda 9. BMW , Mini 10. Fiat 11. American Ford 12. Mazda 13. Maserati 14. Ferrari 15. Aston Martin 16. Volvo 17. Porsche.

Feedback and Guide Foxwell NT510 scanner BMW coding injector

Foxwell NT510 BMW scanner coding injector is a pretty impressive list of functions for such a small unit. I picked one up when it was on sale $155 on foxwelltechshop.com

It is very easy and intuitive to use as it guides you through the process. It has access to the TCU and TCU parameters yes.

Here NT510 BMW scanner coding injector feedback:
Can code injectors and new battery on 2008 BMW 135i
Allow to alignment and calibrate fuel injectors on a 2009 535i N54 engine
Drive: Adjust injector ok on:
1_E81/E82/E87/E88
3_E90/E91/E92/E93
5_F10/F11
5_F18
X6_E71
Z4_E89
7_F02
7_F01/F02/F0
Drive: Fuel injector matching ok on: 1_E81/E82/E87/E88
Drive: Fuel injector adaptation ok on: 7_F01/F02/F04
Hasn’t test all, but the supplier list, post their function list for your reference.
http://www.foxwelltechshop.com/upload/pro/201606/foxwell_bmw_functionlist.pdf

• Operation Guide:
  You have to input all 6 digits together no spaces, someone may only enter 3 digit codes. Also the DME separates the 6 digits code for the injector into two 3 digit pairs automatically. There is a note in the prompts that says the last digit may be altered /adjusted by the DME.

Comprehensive guide:
the DME defaults to a low range of the injectors specs by -/+ 1 of the last digit of the set. That is normal. If you want the full range of the injector spec ie closest to the actual numbers displayed on the injector, then you need to offset entry.
Example, if you enter 477 and the DME changes it to 476, then enter 478 to target 477. If the DME adjusts to 479 then you will have to go back and enter 477 and 476 will be the highest you can go staying within the injector specs and not exceeding it.

• If got prompt “the values were not valid” after save, following this guide:
  Update the software for NT510 BMW scanner, then select your device first by VIN, it will load a pre profile. Then go back and select your chassis and model manually. Go to service and try entering the values again. You can also try saving each cylinder entry one at a time.

Foxwell NT510 VS Foxwell GT80

Generally speaking, Usually Foxwell NT510 and Foxwell GT80 share the same software, same functions

The only difference is NT510 comes with one car brands for free and pay $70 to add extra brands, it can add up to 5 brands among 17 brands.

While Foxwell GT80 covers GT80 PLUS provides professional diagnosis on more than 59 American, Asian and European vehicle makes.

To sum up: Foxwell NT510 is better for DIY home use, and Foxwell GT80 is suitable for big workshops.

Foxwell NT510 Vs Foxwell GT80 

	Foxwell NT510	Foxwell GT80 Plus	Foxwell GT80 Mini
Mux
Language	English,French,Spanish,Dutch, German,Russian,Hungarian,Portuguese, Italian	English, French, Spanish,Dutch, German,Russian,Hungarian,Portuguese,Italian, Korean, Thai, Chinese	English, French, Spanish,Dutch, German,Russian,Hungarian,Portuguese,Italian, Korean, Thai, Chinese
Vehicle coverage	(Customizable, add up to 5 brands)    1. Chrysler	more than 59 American, Asian and European vehicle makes (All system All makes)	more than 59 American, Asian and European vehicle makes (All system All makes)
	2. GM
	3. Honda, Accura
	4. Hyundai,Kia
	5. Toyota,Lexus, Sicon
	6. Land Rover, Jaguar
	7. OPEL, Vauxhall
	8. VW, AUDI, Seat, Skoda
	9. BMW
	10. Fiat
	11. American Ford
	12. Mazda
	13. Maserati
	14. Ferrari
	15. Aston Martin
	16. Volvo
	17. Porsche
Works on almost all electronic systems	√	√	√
OBDI and OBDII compatiblity	√	√	√
Reads and clear codes	√	√	√
Reads/records/graphs live sensor data	√	√	√
Freeze frame data	√	√	√
ECU information	√	√	√
Code troubleshooters	√	√	√
Bi-directional control tests	√	√	√
EPB Service	√	√	√
Oil Light Reset	√	√	√
DPF Reset	√	√	√
SAS(Steering Angle Sensor Calibration)	√	√	√
Battery Configuration	√	√	√
TPS/TBA(Throttle Body Alignment)	√	√	√
abs bleeding	√	√	√
coding	√	√	√
Other Service Maintenance Function	√	√	√
Hot keys for quick access of data	√	√	√
color screen	2.8′ FTF color screen	10.1″ LED capacitive touch screen	8″ LED capacitive touch screen
18-month free updates	√	√	√
Yearly Update Cost	$60	$500	$500

 

How to Use Foxwell NT510 Regeneration BMW X_E70 DPF?

Here is the tips help you Regeneration BMW X_E70 DPF by Foxwell NT510

If you have the DPF warning light on your BMW X_E70 dashboard, it could get expensive. The warning light indicates a buildup of soot which is not being burned correctly in the DPF system in your car. Your manufacturer owners handbook should show you how to burn off the soot in the DPF, however on many occasions it simply does not work.

A BMW Diagnostic tool is the answer to doing a forced regeneration. With the Foxwell NT510 scanner, DPF Regeneration menu let you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter. When a DPF regeneration cycle is completed, the DPF light automatically goes off.

The DPF works on BMW X_E70 models:

Part / Components / Status / Body Type:
Drive
Diesel particulate filter request regeneration
√
X_E70

Drive
Diesel particulate filter: Replacement
√
X_E70

Hope it helps

http://www.foxwelltechshop.com

Foxwell NT510 Function List and Vehicle Lists

Here is the details for Foxwell NT510 supported function vehicle list, you can download free from:

foxwell-nt510-ford-function list
http://www.foxwelltechshop.com/upload/pro/201606/foxwell-nt510-ford-functionlist-v1.00.pdf

Foxwell_Rolls-Royce_Function List
http://www.foxwelltechshop.com/upload/pro/201606/foxwell_rolls-royce_functionlist.pdf

Foxwell_Opel_Vauxhall_Function_List
http://www.foxwelltechshop.com/upload/pro/201606/foxwell_opel_vauxhall_function_list.pdf

Foxwell_MINI_FunctionList
http://www.foxwelltechshop.com/upload/pro/201606/foxwell_mini_functionlist.pdf

Foxwell_Land_Rover_Functionlist
http://www.foxwelltechshop.com/upload/pro/201606/foxwell_land_rover_functionlist.pdf

Foxwell_Jaguar_Functionlist
http://www.foxwelltechshop.com/upload/pro/201606/foxwell_jaguar_functionlist.pdf

Foxwell_BMW_FunctionList
http://www.foxwelltechshop.com/upload/pro/201606/foxwell_bmw_functionlist.pdf

nt510-porsche-function-list
http://www.foxwelltechshop.com/upload/pro/201703/nt510-porsche-function-list.pdf

Foxwell-NT510-FIAT-Functionlist
http://www.foxwelltechshop.com/upload/pro/201608/foxwell-nt510-fiat-functionlist-v1.00.pdf

How to Update Foxwell NT510 and Buy additional software for NT510 scanner

Here we’d like to introduce you How to Update Foxwell NT510 and Buy additional software for NT510 scanner

NT510 Update Guide
Delicately developed by the most distinguished experts in this industry, Foxwell NT510 is a low-cost handheld
scan tool that delivers OE-level diagnosis on all the electronic systems for a single car manufacturer. It does not
only include basic functions such as read/erase code, live date, but also it’s capable of advanced functions such
as actuation, adaptation coding and programming- ideal for specialist, garages and car enthusiasts.
Available makes are: Acura, Alfa Romeo, Abarth, Audi, Australian Ford, BMW, Chrysler, Fiat, GM, Honda,
Hyundai, Holden, Jaguar, KIA, Lancia, Lexus, Land Rover, Maserati, MINI, Toyota, Opel, Rolla-Royce, Scion,
Seat, Skoda, Vauxhall, VW and more.

The scanner is shipped with one free software and can cover up to five vehicle makes. More software can be
added anytime at extra cost.

To update your scanner, please follow the three steps as below:
Step1: Obtain an FOXWELL ID.
Step2: Register the product with the product serial number and product password.
Step3: Update the product by the update application FoxScanner.

1 Update the Scanner
To update scanner, you need the following tools:
● The scan tool
● PC application FoxScanner
● PC or laptop with USB ports and Internet explorer
● Internet service
● TF card reader
To be able to use update tool, PC or laptop must meet the following minimum requirements:
● Operation System: Win98/NT, Win ME, Win2000, Win XP, VISTA, Windows 7, Windows 8 and Windows 10.
● CPU: Intel PⅢ or better
● RAM: 64MB or better
● Hard Disk Space: 30MB or better
● Display: 800*600 pixel, 16 byte true color display or better
● Internet Explorer 4.0 or newer

Kindly Notice:

Before updating, please make sure your network works correctly. Before updating, please make sure you have already created a Foxwell ID

To update your scanner:
1. There are two ways to download the update PC application.

a. Visit our site http://www.foxwelltech.com and go the Product page. Find your product model and click it to view the product
profile. Select Download tab to download the PC application file.

b. Log in at http://www.foxwelltech.com , go to your Member Center and select Registered Product. Click Software Details.
You will find the link right on the top of the software.

2. Unzip the application file. Follow instructions on computer screen to install the application and driver.

3. Double click the desktop icon to launch the application.
4. Remove the TF card from the scanner, put it into the card reader and plug the reader into the computer. The TF card is
on the left side of scanner.

5. Log in with your Foxwell ID and password.

6. Foxscanner will automatically recognize the serial number and display all available applications, please read it carefully before update. Please note that you are allowed to select and install any one of the vehicle software from the available update list free of charge and in future you are allowed to install updates of the selected brand only. In case you want to install any other vehicle software, please contact us or sign in your member center to place an order of buying extra software.

NOTE
If you’ve formatted the TF card, please select your serial number first and all available updates will display.

7. Click the check box(es) in front of the software you wish to update and then click the Update button to download.

NOTE
Please select the software you want to update, as you can ONLY have access to the update of this brand in the future once it’s been selected initially. To access other brand application, you have to pay to access, Please refer to Section 4 for buying extra software.

8. When Update button is clicked, it begins to download. And you can check the Current Status. If the Current Status
shows Downloading, please do not close the update application. Please do not close Foxscanner until it shows Update
Done.

9. Please click Software Management to review all the updated software.

NOTE
If “Update Failed” dialog comes up, it indicates that the software updates failed. Please check the network connection or TF card. If the problem still exists, please contact support@foxwelltech.com or your local dealer for assistance.

10. To uninstall some software, please select them and click the Uninstall button.

2 Buy Extra Software

NT510 is shipped with one free software and can cover up to five vehicle makes. More software can be
added anytime at extra cost. You can contact the reseller or following the steps below to buy extra software.
To buy extra software:

Directly order the additional software from :

http://www.foxwelltechshop.com/wholesale/software-authorization-for-nt510-multi-system-scanner.html

After ordered, please contact sales@foxwelltechshop.com provide your NT510 SN number to our customer service, they will help you add another software

Update the scanner, you’ll see another software:

How to use Foxwell NT510 Scan Tool do Fault codes and actuations on a Fiat Grande Punto

Here is the details using Foxwell NT510 Scan Tool do Fault codes and actuations on a Fiat Grande Punto, let’s see together

Tool we need:

Foxwell NT510

Car model:

Fiat Grande Punto

Detail steps:

First we select the vehicle

System Dada Inilialzing Please Wait

then the engine type

Then we start selecting control modules to scan

How about some active tests(actuations)?

Check detail Active test including:

We’ll try sweeping the dials, watch the speedo and rev cotunter

Foxwell NT510 test 2003 VW Jetta ABS

I bought Foxwell NT510 scan tool to access the ABS system on my 2003 VW Jetta. I love this tool! I keep it in the car with me so I can demonstrate and suggest to others to buy one as well. I am totally amazed and how in depth this scanner can read and of all the extra features it can access in the VAG system. This is a MUST buy for anyone who owns a VW or Audi!

Here is a not-true feedback:

I run an independent repair shop. Bought this unit after already getting the foxwell only for abs and air bags, that unit works pretty good for the price. After researching the NT510 I found it would be a good basic unit for our quick scans. On the foxwell website as well as the amazon ad it lists it for over 60 makes for US. The Unit I received only works on VW/Audi and the box it came in reflected this as well. I would have never spent the time on this if I knew it were only for VW/Audi. Seller should be required to disclose this on the amazon ad.

Actually:

Foxwell NT510 is available with 11 brands vehicles, you can choose one kind of below car makers for free, if you still need any of below software, you need to pay 60 GBP for them

Chrysler
GM
Honda, Accura
Hyundai,Kia
Toyota,Lexus, Sicon
Land Rover, Jaguar
OPEL, Vauxhall
VW, AUDI, Seat, Skoda
BMW
Fiat
American Ford

After you receive NT510 device, it does not come default with no car software, customer can download one software for free from foxwelltech.com