Month: May 2017

Feedback and Guide Foxwell NT510 scanner BMW coding injector

Foxwell NT510 BMW scanner coding injector is a pretty impressive list of functions for such a small unit. I picked one up when it was on sale $155 on foxwelltechshop.com

It is very easy and intuitive to use as it guides you through the process. It has access to the TCU and TCU parameters yes.

Here NT510 BMW scanner coding injector feedback:
Can code injectors and new battery on 2008 BMW 135i
Allow to alignment and calibrate fuel injectors on a 2009 535i N54 engine
Drive: Adjust injector ok on:
1_E81/E82/E87/E88
3_E90/E91/E92/E93
5_F10/F11
5_F18
X6_E71
Z4_E89
7_F02
7_F01/F02/F0
Drive: Fuel injector matching ok on: 1_E81/E82/E87/E88
Drive: Fuel injector adaptation ok on: 7_F01/F02/F04
Hasn’t test all, but the supplier list, post their function list for your reference.
http://www.foxwelltechshop.com/upload/pro/201606/foxwell_bmw_functionlist.pdf

  • Operation Guide:
    You have to input all 6 digits together no spaces, someone may only enter 3 digit codes. Also the DME separates the 6 digits code for the injector into two 3 digit pairs automatically. There is a note in the prompts that says the last digit may be altered /adjusted by the DME.

Comprehensive guide:
the DME defaults to a low range of the injectors specs by -/+ 1 of the last digit of the set. That is normal. If you want the full range of the injector spec ie closest to the actual numbers displayed on the injector, then you need to offset entry.
Example, if you enter 477 and the DME changes it to 476, then enter 478 to target 477. If the DME adjusts to 479 then you will have to go back and enter 477 and 476 will be the highest you can go staying within the injector specs and not exceeding it.

  • If got prompt “the values were not valid” after save, following this guide:
    Update the software for NT510 BMW scanner, then select your device first by VIN, it will load a pre profile. Then go back and select your chassis and model manually. Go to service and try entering the values again. You can also try saving each cylinder entry one at a time.

User Guide for Foxwell NT630 ABS & Airbag Reset Tool (for Beginner User)

Here is the guide for Foxwell NT630 for Beginner User

If you got Foxwell NT630 ABS & Airbag Reset Tool for the first time,you need to follow below guide to operate before troubleshooting ABS and SRS.

Foxwell NT630 Software updates:
This tool comes with free software updates for 18 months from the date of purchase.
To apply software updates to the tool you will need a Windows PC/Laptop and an SD Card Reader.
If we have sufficient time between your order being placed and being shipped, we will often install the latest available updates for you on the day the order is shipped.

Foxwell NT630 Registration part 1 – Create an account
You firstly need to create an account with Foxwell and register your tool.
This can be done through the FoxScanner update software, which can be downloaded for free from the http://www.foxwelltech.com.
Just select your tool from the list Updates page and follow the instructions to download the latest version of FoxScanner.

The file downloaded will be a compressed zip file. Open that file and run the installer inside it.
Please note: The installer will sometimes try to install FoxScanner to the D:\ drive. In most cases you will need to change this to C:\

Once installed, open the FoxScanner software.
Click the Register button and complete the registration page to create your Foxwell account.

Foxwell NT630 Registration part 2 – Add your tool to the account
To register NT630 tool, you will need the tool’s Serial Number and ‘Register Password’.
You can find these on the tool by selecting Setup > About.

When logged into FoxScanner, click the ‘Register Products’ icon.
On the ‘S/N Registration’ tab, put a tick in the box marked ‘001’ then select NT630 tool in the Part Number column.
Enter the product’s serial number and password, then click Submit.
A confirmation box should be shown confirming successful registration.

Foxwell NT630 Updating Foxwell NT630:
Now close the FoxScanner software, remove the SD card from your tool (making sure the tool is turned off first!) and connect it to the PC via an SD card reader.
Please note: Due to the expanding coverage of the NT630, to install all available updates you will need an 8GB SD Card.
Tools supplied before June 2016 will have been supplied with a 4GB card.
So long as you are still within your 18 month update period you can run the update procedure listed below with a new, blank 8GB card.

We recommend re-formatting new 8GB SD cards to the FAT32 file system, with an “Allocation unit size” of 4096 bytes before applying the software updates.
Once Windows has detected the SD card, run the FoxScanner software and login again. click the ‘My Updates’ button.
After a few seconds, a list of the available software updates will appear.
Ensure that the correct serial number is displayed in the drop-down list.
Click the Update button to download and install available updates.

Please Kindly Notice: the Foxwell NT630 update process can take a long time. If your tool has not been updated recently, it may take a few hours for the update process to complete. Once the update has completed, don’t forget to ‘safely remove’ the SD card in Windows before unplugging it, to avoid the possibility of data corruption.

Renewals
Once your initial 18 months of free updates expire, the tool will continue to work – it will not ‘time out’ – but you will no longer be able to access the update server.
Should you wish to continue updating your Foxwell NT630, you will need to purchase an update package, which will give you a further 12 months of access to the update servers.

From www.foxwelltechshop.com

Foxwell NT510 VS Foxwell GT80

Generally speaking, Usually Foxwell NT510 and Foxwell GT80 share the same software, same functions

The only difference is NT510 comes with one car brands for free and pay $70 to add extra brands, it can add up to 5 brands among 17 brands.

While Foxwell GT80 covers GT80 PLUS provides professional diagnosis on more than 59 American, Asian and European vehicle makes.

To sum up: Foxwell NT510 is better for DIY home use, and Foxwell GT80 is suitable for big workshops.

Foxwell NT510 Vs Foxwell GT80 

Foxwell NT510 Foxwell GT80 Plus  Foxwell GT80 Mini
Mux
Language English,French,Spanish,Dutch, German,Russian,Hungarian,Portuguese, Italian English, French, Spanish,Dutch, German,Russian,Hungarian,Portuguese,Italian, Korean, Thai, Chinese English, French, Spanish,Dutch, German,Russian,Hungarian,Portuguese,Italian, Korean, Thai, Chinese
Vehicle coverage (Customizable, add up to 5 brands)    1. Chrysler more than 59 American, Asian and European vehicle makes (All system All makes) more than 59 American, Asian and European vehicle makes (All system All makes)
2. GM
3. Honda, Accura
4. Hyundai,Kia
5. Toyota,Lexus, Sicon
6. Land Rover, Jaguar
7. OPEL, Vauxhall
8. VW, AUDI, Seat, Skoda
9. BMW
10. Fiat
11. American Ford
12. Mazda
13. Maserati
14. Ferrari
15. Aston Martin
16. Volvo
17. Porsche
Works on almost all electronic systems √ √ √
OBDI and OBDII compatiblity √ √ √
Reads and clear codes √ √ √
Reads/records/graphs live sensor data √ √ √
Freeze frame data √ √ √
ECU information √ √ √
Code troubleshooters √ √ √
Bi-directional control tests √ √ √
EPB Service √ √ √
Oil Light Reset √ √ √
DPF Reset √ √ √
SAS(Steering Angle Sensor Calibration) √ √ √
Battery Configuration √ √ √
TPS/TBA(Throttle Body Alignment) √ √ √
abs bleeding √ √ √
coding √ √ √
Other Service Maintenance Function √ √ √
Hot keys for quick access of data √ √ √
color screen   2.8′ FTF color screen 10.1″ LED capacitive touch screen 8″ LED capacitive touch screen
18-month free updates √ √ √
Yearly Update Cost $60 $500 $500

 

How to Use Foxwell NT510 Regeneration BMW X_E70 DPF?

Here is the tips help you Regeneration BMW X_E70 DPF by Foxwell NT510

If you have the DPF warning light on your BMW X_E70 dashboard, it could get expensive. The warning light indicates a buildup of soot which is not being burned correctly in the DPF system in your car. Your manufacturer owners handbook should show you how to burn off the soot in the DPF, however on many occasions it simply does not work.

A BMW Diagnostic tool is the answer to doing a forced regeneration. With the Foxwell NT510 scanner, DPF Regeneration menu let you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter. When a DPF regeneration cycle is completed, the DPF light automatically goes off.

The DPF works on BMW X_E70 models:

Part / Components / Status / Body Type:
Drive
Diesel particulate filter request regeneration
√
X_E70

Drive
Diesel particulate filter: Replacement
√
X_E70

Hope it helps

http://www.foxwelltechshop.com

Test Ok using Foxwell NT624 on Dodge Ram 3500 12V 2005

I keep reading that the Foxwell NT624 from www.foxwelltechshop.com displays data for OBD I, but there only appears to be an OBD II cable. Which is correct? Also, will it work with Diesel Pick Up trucks?

My personal truck is 12V 2005 year Dodge Ram 3500 with 6.5 Liter Cummins Turbo Diesel.

Does the OBD I cable have to be purchased separately?

Will it display DATA for OBD I, or only read codes?

Answer from Foxwelltechshop.com engineers:

Yes, if you use Foxwell NT624 to work Dodge Ram 3500, you need an OBD1 to OBD2 adapter. It will display DATA for OBD I, not only read codes.

Here on how to use Foxwell NT624 (with some pictures):

How to update Foxwell NT624?

Free update on official wesite http://www.foxwelltech.com for 18 months after register, the update cost is 100USD/year after 18Months

(Save More Time and Money) GT80 Plus Diagnostic Platform !

It is important for automotive repair shops to get as much coverage as possible to effectively and quickly service any vehicle.

Foxwell GT80 PLUS provides professional diagnosis on more than 59 American, Asian and European vehicle makes. What’s also important is having access to a vast range of controllers (ABS, airbags, instrument cluster, etc.), live sensor data, and system/component-level bi-directional controls to get the job done faster and with a greater degree of accuracy and prevent dreaded “comeback”. In addition, it has access to the most commonly required service features like brake deactivation, service resets, and transmission adaptations.

Foxwell GT80 supports multiple languages

Attention: Default language is English, if you wanna another language version can choose the language you wanna :

http://www.foxwelltechshop.com/wholesale/gt80-plus-diagnostic-platform.html

Foxwell GT80 Plus Vehicle Coverage:

USA Coverage

Chrysler,Ford,GM,Brazilian GM(For Brazilian Market Only)

ASIA Pacific coverage

Au Ford (For Australian Market Only), Acura, Brilliance, BYD, Chery, Daewoo, Geely, Great Wall, Honda, Holden (For Australian Market Only), Hyundai, Infiniti, Isuzu, JAC, Kia, Lexus, Mazda, Mitsubishi, Nissan, Perodua, Proton, Scion, Subaru, Suzuki, Toyota

European Coverage

Audi, Bentley, BMW, Bugatti, EU Ford, Jaguar, Land Rover, Maybach, Mercedes Benz, Mini, Opel, Porsche, Rolls-Royce, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, VW

French & Italian Coverage

Abarth, Alfa-Romeo, Citroen, Dacia, Fiat, Lancia, Maserati, Peugeot, Renault

What Can Foxwell GT80 PLUS professional diagnostic system Do?
● Compatible with the latest 2015/2016 models ● Compatible with both OBDI and OBDII cars, SUVs, minivans, light-duty trucks sold worldwide ● Get access to powertrain, chassis and body systems ● Quick Test function to test most vehicle systems ● Read and clear diagnostic trouble codes and resets MIL ● View live vehicle sensors data in a text, graph and gauge format ● Merge interactive live sensor graphs for easy and intuitive diagnosis ● Live data self learning and alarm when live data over range ● Record and playback your data logs for offline analysis ● Read and clear freeze frame data ● Run component/system bi-directional tests ● Support adaptations and control module coding ● Key coding for several vehicles ● Support the most commonly required service features like brake deactivation, service resets, and transmission adaptations ● Multi-language menus and code definitions for an international marketplace ● Code troubleshooters provide you faster and easier diagnosis

Foxwell GT80 Update
18-month free updates.With internet access, you will always have the latest bug fixes, new vehicles, newly added parameters and functionality at your fingertips. And they are free for the first 18 months after your registration.

Foxwell GT80 Plus can make most types of car,for the automotive repair shops must be a nice chose!

This is from www.foxwelltechshop.com a website to special sale Foxwell diagnostic tools

(Review ) Foxwell NT301 Customer Real Experience

Here is the real customer feedback for Foxwell NT301 scanner

  • This NT301 OBDII scan tool I paid $65 bought from FoxwellTechshop.com has a large color LCD display to make navigation very simple and easy. The tool is protected by a rubber surround to absorb any minor shock from use. The unit does not require any batteries to operate.
  • Most cars manufactured from 1996 will support OBDII diagnostic. All you need to do is plug it into your car’s OBDII (DLC) port and it will power up using the car’s power. You can then start the vehicle to read any trouble codes or pending codes. If there are trouble codes, you can use this tool to erase the code. Of course you should fix the issue or else the code will return.
  • The tool also have quick access buttons to read codes, erase codes, and I/M readiness check. There are 3 LEDs in the middle of the screen to show you if you have any trouble codes, or pending codes along with audible beeps. If you want to venture into more advanced features, this tool is able to show live data and record data. You can also connect the unit to a computer with the included USB cable to print the test result. There is an option to look up definition of trouble codes simply by entering the trouble code. Once you are done, just unplug the unit from the car and put away the tool. Can’t be any simpler. Overall it’s a well designed tool for all the DIYers.
  • I had trouble initially with this code reader, it worked fine with my VW and then i used it on my Dodge and had errors connecting to the OBD system, same thing on my Ford. Well I am pleased to say I was able to do an update on the unit which made it function properly again!
  • The scan tool works as advertised. It connects to the vehicle easily and the tool is easy to operate. The only problem I have with the unit so far is the USB cable that came with the unit, the mini end that goes to the tool does not go far enough in to stay connected. I had to dig out another cable I had here that had a mini end that was a few millimeters longer and it works great. The cable on the left, in the picture, is a cable that I had at the house and the one on the right was the one that came with the product. You can see a slight length difference.
  • Its just enough to keep the cable from completely connecting.

Foxwell NT510 Function List and Vehicle Lists

Here is the details for Foxwell NT510 supported function vehicle list, you can download free from:

foxwell-nt510-ford-function list
http://www.foxwelltechshop.com/upload/pro/201606/foxwell-nt510-ford-functionlist-v1.00.pdf

Foxwell_Rolls-Royce_Function List
http://www.foxwelltechshop.com/upload/pro/201606/foxwell_rolls-royce_functionlist.pdf

Foxwell_Opel_Vauxhall_Function_List
http://www.foxwelltechshop.com/upload/pro/201606/foxwell_opel_vauxhall_function_list.pdf

Foxwell_MINI_FunctionList
http://www.foxwelltechshop.com/upload/pro/201606/foxwell_mini_functionlist.pdf

Foxwell_Land_Rover_Functionlist
http://www.foxwelltechshop.com/upload/pro/201606/foxwell_land_rover_functionlist.pdf

Foxwell_Jaguar_Functionlist
http://www.foxwelltechshop.com/upload/pro/201606/foxwell_jaguar_functionlist.pdf

Foxwell_BMW_FunctionList
http://www.foxwelltechshop.com/upload/pro/201606/foxwell_bmw_functionlist.pdf

nt510-porsche-function-list
http://www.foxwelltechshop.com/upload/pro/201703/nt510-porsche-function-list.pdf

Foxwell-NT510-FIAT-Functionlist
http://www.foxwelltechshop.com/upload/pro/201608/foxwell-nt510-fiat-functionlist-v1.00.pdf

(Report) Foxwell NT630 Tested vehicles

Here is the customer’s report using Foxwell NT630 tested vehicles

EOBD engine coverage (2001+ petrol cars, 2004+ diesel cars) — confirmed

Live sensor data from supported systems — confirmed

ABS coverage on worldwide vehicles — confirmed

Airbag coverage on worldwide vehicles — confirmed

Multilingual support — confirmed

Internet updatable (18months free update on http://www.foxwelltech.com)— confirmed

Print via PC— confirmed

Specific makes/ year works ok:

Analyze and graph the O2 sensors…OK

– 2015 Mercedes S550 W222 model turn off an airbag light on OK.

– 2004 Hyundai Sonata AirBag diagnosis OK

– 2002 Mercedes Benz CLK320 clears the SRS light and malfunction warning OK

– Ford Falcon BA V8 ABS diagnosis OK

– Truck GMC the 2005 year reset the airbag OK

-1997 Pontiac Grand Am perform gear tension relief sequence OK

– KIA Sedona 2008 airbag light reset OK

– Jeep Grand Cherokee ZJ diesel 2.5 1997 reset SRS Codes OK

It lists error codes

Tell me what’s wrong with my air bag light

Reset the codes

Worked fine with my VW, Dodge, Ford

Read Subaru SRS codes

Read 2 Pontiac’s codes

The live data is what you would expect.

Being able to store codes on the included flash disc is quite nice.

In a word, Foxwell NT630 is a solid unit without being too heavy and comes in a very nice hard case. It has a thorough diagnostic for everything you can imagine. Overall this is a fine car scanner.

Foxwell NT630 price: $169 DHL free shipping at http://www.foxwelltechshop.com